Retro-leaning track pants with side-stripe taping or piping on smooth tricot or poly and sporty heritage styling with modern fit options.
Tell us your Stripe method and send your Stripe Pantones. We quote within 24 hours.
Taped, woven, or printed; priced side by side
Stripe colors matched exactly
Matching track jacket available
Inspected before folding and packing
Tricot / poly / nylon.
Taped, woven, printed.
Open, zip, or popper.
Optional mesh.
On track pants, the side stripe does the identity work, and how you make that stripe (taped, woven-in, or printed) changes both the look and the cost. Taping is crisp and premium; printing is the cheapest but can crack; a woven-in stripe is the most durable and the most expensive to set up. The rest is fit and finish: smooth tricot for that retro sheen and ankle zips or poppers for the sporty detail. This is a heritage silhouette that lets you signal a lot with one line down the leg.
This blueprint covers the build sheet, stripe construction methods and what each costs, tricot vs poly, ankle-finish options, private-label, sampling, MOQ and compliance, sizing, and buyer questions.
Buyer tip: pick your stripe method first. Taped, woven, and printed stripes look similar in a render but sit at three different price points and durabilities.
Built for brands
The track pants cross three worlds: heritage fashion, sport, and streetwear sets.
Smooth tricot, a crisp taped stripe, and ankle zips give you the authentic late-’70s to early-’90s look, with a modern fit underneath.
Poly twill in your club colors with a woven-in stripe that survives heavy wear. Stripe colors matched to your Pantone colors so the kit reads as yours.
A track pant with a matching jacket in the same fabric and stripe is one of the easiest sets to sell as a complete look.
A heritage sporty bottom, the stripe, and the ankle finish carry the styling.
The first decision
Your buyer tip says it: the three look similar in a render but sit at three different price points. Here’s the side-by-side.
| Stripe method | The look | Durability | Cost | Choose it for |
|---|---|---|---|---|
| Taped | Crisp and premium | Good | Middle | Heritage and fashion track pants |
| Woven-in | Built into the fabric | The most durable | Highest setup | Teamwear and pants that get hard wear |
| Printed | Flat and graphic | Can crack over time | The cheapest | Trend pieces and tight budgets |
The stripe is the one detail that makes a track pant yours. When a printed stripe cracks or peels after a season, that’s the part everyone sees. Defaulting to the cheapest method can save a little per pant and cost you the look that sold it. Choose the method for how long the pant needs to last.
Smooth tricot gives the classic retro track sheen and a fluid drape, the authentic ’78–’92 look. Poly twill is more matte, more durable, and holds a press. Nylon adds a technical, weatherable edge. Tricot is the pick for fashion/heritage; polyester for something that survives heavy wear. Recycled poly is available if sustainability is part of the pitch.
| Fabric | The look | Wear | Best logo method |
|---|---|---|---|
| Tricot | Retro sheen, fluid drape | Fashion and heritage | Heat transfer |
| Poly twill | Matte holds a press | Heavy wear | Embroidery |
| Nylon | Technical | Weatherable | Heat transfer |
| Recycled poly | Same sporty look | For a sustainability story | Embroidery or heat transfer |
The look:
Clean and relaxed.
Best for:
Straight-leg and fashion track pants.
Cost:
The simplest finish.
Classic track detail
The look:
Sporty and technical.
Best for:
Tapered track pants. The zip adjusts the leg opening.
Cost:
Adds zips, which you can brand with custom pulls.
The look:
Heritage sportswear.
Best for:
Retro builds and tear-away styling.
Cost:
Adds hardware to every leg.
Beyond the stripe, brand the thigh, the ankle, and the chest of a matching top. Contrast piping and woven taping are branding surfaces in themselves. Embroidery sits well on poly twill; heat-transfer suits smooth tricot. Custom ankle-zip pulls and drawcord tips finish the sporty look.
| Placement | How brands use it |
|---|---|
| The side stripe | Your colors in a woven or taped stripe. The strongest brand cue on the pant |
| Contrast piping | A thinner line that frames the leg and adds a second color |
| Thigh | Embroidery on poly twill, heat-transfer on tricot |
| Ankle | A small logo or custom zip pulls on the ankle zips |
| Drawcord tips | Custom tips that finish the sporty look |
| Matching top | The same stripe and logo on a track jacket for a full set |
The best track brands are recognized by their stripe before anyone reads a logo. Pick a stripe width and color combination that’s yours alone, keep it on every piece, and customers start spotting it from across the street. We’ll help you design an original stripe, not a copy of someone else’s.
Straightforward to sample; the one thing to approve carefully is the stripe color and method.
Send your tech pack, sketch, or a reference pair you like; if there’s no tech pack, we reverse-engineer the pattern from the sample.
We will quote within 24 hours based on your fabric weight, decoration, and target Incoterm and then confirm the spec in writing.
The proto sample was cut and shipped (7–10 days), so you can check the block, rise, and proportion on a real body rather than a flat drawing.
Fit + fabric sign-off: we grade the full size run to your measurement chart and match lab-dips to your Pantone colors.
Pre-production (PP) sample locks every seam, trim, and label; nothing enters bulk until you approve it.
Bulk cut, sewn, and finished (4–6 weeks), then AQL 2.5 inspected before folding, polybagging, and cartoning.
Ship FOB or DDP with your main labels, care labels, hangtags, and packaging already on the garment.
The stripe method and fabric type drive a track pant’s cost more than the cut.
The biggest lever. Woven costs the most to set up, taped sits in the middle, and printed is cheapest but least durable.
An open hem is the simplest. Zips and poppers add hardware on every leg, and your quote shows what each one costs.
A mesh lining adds comfort and cost. Decide before sampling so it’s priced and built in from the start.
MOQ is from 50 pieces per colorway per silhouette. Ordering multiple silhouettes in one dye lot can share setup costs, and we’ll structure the quote around it.
| Quantity / style | Indicative unit price |
|---|---|
| 100–198 | Base |
| 200–598 | −1% |
| 600–998 | −2% |
| 1,000–1,998 | −3% |
| 2,000+ | −4% |
Exact pricing is issued on the quote against your fabric, decoration, and Incoterm.
This assumes one proto round and quick Stripe and PP approvals.
| Stage | By air | By sea |
|---|---|---|
| Quote | Within 24 hours | Within 24 hours |
| Proto sample | 7-10 days | 7-10 days |
| Bulk, including AQL inspection | 18-30 days | 18-30 days |
| Shipping | 5-12 days | 25-40 days |
| Stock in hand | About 5-8 weeks | About 8-12 weeks |
| Size | Waist | Hip | Inseam |
|---|---|---|---|
| S | 72 | 100 | 74 |
| M | 78 | 106 | 76 |
| L | 84 | 112 | 78 |
| XL | 90 | 118 | 80 |
Available tapered or straight. Waist relaxed; graded to your tech pack. Ankle zips adjust the leg opening.
The retro track look is easy to get almost right and hard to get crisp. We match stripe Pantone colors exactly, keep taping and topstitching clean, and offer all three stripe methods so you pick the right cost/durability balance instead of defaulting to the cheapest print.
Taped stripes are crisp and premium. Woven-in stripes are the most durable and the most expensive to set up. Printed stripes are the cheapest but can crack. They look similar in a render, so pick by durability and price point.
Yes. We match stripe and fabric colors to your Pantone references through lab-dips, so your stripe comes out exactly the shade you want.
Tricot for the classic retro sheen and fluid drape, the pick for fashion and heritage lines. Poly twill for a matte finish that’s more durable and holds a press, the pick for heavy wear.
Yes. A matching track jacket in the same fabric and stripe is available, so you can sell the full set. See our tracksuits.
Yes. Choose ankle zips, poppers, or an open hem. Zips adjust the leg opening, and you can add custom zip pulls.
From 50 pieces per style, split across as many colorways as you need. Running more than one silhouette in one dye lot can share setup costs.
Yes. Contrast piping gives a thinner line that frames the leg, and it can be combined with a stripe for a second color.
Both are available. Tapered pairs naturally with ankle zips; straight suits an open hem and a more relaxed look.
Yes. Recycled poly is available if sustainability is part of your pitch.
Yes. A mesh lining is optional. It adds comfort and some cost, so decide before sampling.
Ready when you are
The stripe decides the price, so start there. Missing some of this? Send what you have.
