Matched two-piece sets, tracksuits, sweat sets, and co-ords made to move together across 9 styles. Top and bottom cut from one dye lot, in one production run, in our Sialkot factory.
Brands Supplied
Monthly Capacity
Operating Since
Quote response
These specs apply across all styles. Each style page below adds its own construction, fit, and photos.
Top + Bottom
MOQ per style
Sampling time
Fleece, tricot, velour
Most mismatched sets fail before sewing starts tops and bottoms cut from different fabric batches never match, no matter how good the factory. Set manufacturing is a batch-discipline problem, and we solve it structurally.
The top and bottom are cut from the same fabric batch, same dye lot, and same roll where possible. Color matching isn’t injected into the set; it’s built in before cutting.
Both pieces run through decoration, washing, and finishing together, so prints, washes, and trims age from the identical starting point.
Inspection pairs the actual set: top and bottom are checked together for shade, trim match, and proportion, not as two separate garments that happen to ship in one carton.
A set’s fabric has to work on a top and a bottom simultaneously drape on the body, recovery at the knees and elbows. All knits pre-shrunk before cutting.
| Fabric | Weight range | Used for |
|---|---|---|
| Brushed-back fleece | 400-500gsm | Heavyweight sweat sets, hoodie + jogger sets |
| Loopback / French terry | 320-400gsm | Mid-weight sets, shorts sets, warmer climates |
| Tricot | 220-280gsm | Tricot and retro 90s tracksuits: the glossy heritage look |
| Poly interlock | 200-260gsm | Basketball warm-ups, matte athletic sets |
| Velour | 260-320gsm | Velour tracksuits plush pile, Y2K revival sets |
| Bonded tech fleece | 300-360gsm | Tech fleece tracksuits, tapered athletic sets |
A set is a pairing decision, not a fixed product. Every set is assembled from our proven single-piece blocks, the same patterns behind our hoodie, tee, and bottoms ranges, so any top can pair with any bottom.
A set is sampled as a set; both pieces were are developed, fitted, and approved together, so one sampling cycle covers the whole product.
Send your set design, tech pack, or reference pieces. We confirm fabric, both fits, trims, and target set price.
Within 24 Hours
Proto set to lock construction, then a fit set in your fabric top and bottom fitted together on a body as they’ll be sold.
7~10 Days Per Round
The PP set was signed off on for fabric, trims, labels, and decoration on both pieces before bulk cutting.
3~6 Days
Both pieces were cut from one batch and produced in one coordinated run. Progress photos at each stage.
18~30 Days
Sets were inspected as pairs for shade match, trim match, and measurements on both pieces against the approved PP set.
In-line + Final AQL
Packed to your spec and shipped worldwide by air or sea, with export documents handled by us.
5~12 days By Air
Send your set design or reference pieces with the target quantity. We reply with one itemized set price: fabric, both garments, decoration, and shipping are broken out.
Top and bottom dyed together, cut from one batch; matching is structural, not inspected-in.
Fleece, tricot, velour, and tech are the full set of fabric spectrums under one roof.
Low MOQ per style, counted honestly as sets, not doubled by stealth.
QC on every unit against your approved PP sample.
GIBBEN CLOTHING operates from Sialkot, Pakistan one of the world’s densest apparel manufacturing ecosystems. We’re on the factory floor daily: fabric checks, line supervision, and pre-shipment inspection happen in person, not through an agent.
Sewing machines on sets lines
Sets per month capacity
Registered with SCCI & FBR
Export markets served
5-12 days door-to-door for launch-critical drops. DHL/FedEx for sample shipments.
25-40 days for larger volume orders at lower per-unit cost.
Packed as paired sets or as separates with coordinated labeling matched to how you sell. Export documents prepared by us.
Yes an S top with an M bottom counts as one set, and your size curve can split top and bottom independently inside the MOQ. Real customers aren’t one size top and bottom; your order shouldn’t have to pretend they are.
One. 50 sets means 50 tops plus 50 bottoms, 100 garments, as a single minimum. We don’t stack a separate MOQ per piece, and the set price is quoted as one number with both garments itemized inside it.
Brushed fleece (400–500gsm) for heavyweight sweat sets, loopback terry for mid-weight and shorts sets, tricot for the glossy retro suit, poly interlock for matte athletic warm-ups, velour for the plush Y2K set, and bonded tech fleece for tapered athletic sets. The style page for each set covers its fabric in detail.
Structurally, both pieces are cut from the same dye lot, the same fabric batch, and the same roll where possible and produced in one coordinated run. The color match is decided before cutting, then verified again at set-level QC. Mismatched sets come from factories cutting pieces from different batches; we don’t.
Yes, pieces are labeled and can be packed individually with coordinated size tagging, so you can retail the set, the separates, or both. Tell us the retail model, and we pack to it.
Slightly coordinating fabric across two garments adds planning, which is why bulk runs 4–6 weeks. But development doesn’t double: one sampling cycle covers both pieces, fitted together, so a set reaches production nearly as fast as a single style.
Yes, dye recipes, trim specs, and graded patterns are kept on file per style, so reorders and new colorways grade from the same standard. Reorder consistency is the whole point of set discipline.
Yes, matched placements across the top and bottom (chest + thigh hits, embroidery pairs, waistband, and hood labels) are proofed together on the PP set so the branding reads as one system, not two garments.
50% deposit to book production, 50% before shipment; accepted methods: wire/Wise/bank transfer/TT/LC.